Bosch WTN85200GB, Installation And Operating Instructions Manual

Environmental protection    

en

11

:

Warning

Risk of injury/material 

damage/damage to the 

appliance!

The use of spare parts and 

accessories supplied by other 

brands is dangerous and may 

result in injury, material damage 

or damage to the appliance.

For safety reasons, use 

genuine spare parts and 

accessories only.

Caution!

Material damage/damage to 

the appliance

Cleaning agents and agents for 

pretreating laundry (e.g. stain 

removers, prewash sprays, etc.) 

may cause damage if they 

come into contact with the 

surfaces of the appliance. 

Therefore please note:

■

Do not allow these agents to 

come into contact with the 

surfaces of the appliance.

■

Clean the appliance with 

nothing but water and a soft, 

damp cloth.

■

Remove any detergent, 

spray or other residues 

immediately.

7

 Environmental 

protection

Environmental protection

Packaging/old appliance

)

Dispose of packaging in an 

environmentally-responsible manner.
This appliance is designated according 

to European directive 2012/19/EC 

which governs waste electrical and 

electronic equipment (WEEE).
The directive provides a framework for 

the collection and recycling of old 

appliances, which is valid across the 

EU.

Energy-saving tips

■

Spin the laundry before drying. The 

drier the laundry, the shorter the 

drying time will be, thus consuming 

less energy.

■

Load the dryer with the maximum 

load.

Note:  

Do not exceed the maximum 

load for the programs, as this 

prolongs the drying time and 

increases energy consumption.

■

Ventilate the room and keep the air 

inlet on the dryer free to ensure air 

exchange.

■

Clean the fluff filter after each drying 

cycle. If the fluff filter is dirty, the 

drying time is prolonged and energy 

consumption is increased.

■

Energy-saving mode

: If the dryer is 

not operated for a prolonged period, 

it automatically switches off before 

the program starts and when the 

program has ended to save energy. 

The display panel and indicator 

lamps go off after a few minutes and 

the Start button flashes. To activate 

the lighting, press any button, open 

or close the dryer door or turn the 

program selector.