Installation and connection
en
13
During installation, ensure that:
■
The dryer is placed on a clean, level
and firm surface,
■
The mains plug can be accessed at
all times,
■
The air inlet on the dryer is kept clear
and there is sufficient ventilation,
■
The area around the dryer is kept
clean and
■
The dryer is levelled using the
threaded feet.
Note:
Check the alignment of the
appliance with a spirit level and
correct if necessary. Change the
height by turning the appliance feet.
All appliance feet must stand firmly
on the ground.
Incorrect alignment may cause high
noise levels, vibrations and improper
movement of the drum.
Note:
If in doubt, have the appliance
connected by a specialist.
Optional accessories
Order optional accessories
*
from after-
sales service:
■
Washer-dryer stack connection set:
To save space, the dryer can be
placed on top of a suitable washing
machine of the same width and
depth.
The dryer must be secured to the
washing machine using this
connection set.
Order number with pull-out worktop:
WTZ11400
;
Order number without pull-out
worktop:
WTZ20410
.
■
Platform:
For easier loading and unloading,
use a platform to raise your dryer.
Transport laundry with the integrated
clothes basket integrated in the
platform's pull-out drawer.
Order number:
WMZ20500
.
■
Basket for woollens:
Dry individual woollen items, sports
shoes and soft toys in the basket for
woollens.
Order number:
WMZ20600
.
Transport and frost protection
To empty the condensate container:
1.
Use the program selector to select
any program.
2.
Press the Start button.
3.
Wait for 5 minutes.
Note:
The condensation is drained.
4.
Empty the condensate container
again.
5.
Switch off the dryer.
Caution!
Any residual water may leak out and
cause material damage.
Transport the dryer in an upright
position.
* Depending on the model
