en
Appliance settings
32
Notification signal
You can activate or deactivate the
notification signal at the end of the
programme. If you activate this setting,
an audible signal will sound once the
programme has ended.
Activate/deactivate the appliance
setting as follows:
Press
Signal
.
C
is shown/hidden in the display.
The notification signal at the end of
programme is activated/deactivated.
Note:
If a signal does not sound when
the programme ends even though the
notification signal is activated, you can
change the appliance setting.
Altering the appliance settings
You can call up and change the
following appliance settings:
■
Volume of the audible notification
signals (e.g. at the end of a
programme)
■
Volume of the audible operating
signals
■
Spin speed used for spinning the
laundry before drying
Call up and change the appliance
settings as follows:
1.
Set the programme to position 1.
2.
Press and hold
Start/Nachlegen/
Pause (Start/Reload)
. At the same
time:
3.
Set the programme to position 2.
4.
Release
Start/Nachlegen/Pause
(Start/Reload)
.
You can now alter the appliance
settings.
#
+
3
;
#
+
3
;
