background image

en

    Programme settings

24

0

Programme settings

Programme settings

--------

Program setting

Function

Note:  

Not all settings can be activated in every programme. The activated settings are displayed on the pro-

gramme selector (dryness level) or highlighted brightly in the display. You can change or deactivate the ac-

tivated settings by turning the programme selector or pressing the relevant buttons repeatedly.

Drying Target

 :

The dryness level defines how damp or dry the laundry is after the programme 

ends.
Use the programme selector to select the dryness level that you require for the 

laundry you need to dry.

extratrocken 

(Cupboard Extra 

Dry) 

 

Multi-layered, thick laundry that does not dry readily.

schranktrocken 

(Cupboard Dry) 

 

Normal, single-layered laundry.

bügeltrocken 

(Iron Dry) 

 

Normal, single-layered laundry that still needs to be damp after drying and is suit-

able for ironing or hanging up.

Trockengrad 

(Drying Level) 

  

If you think the laundry is still too damp when the drying programme has ended, 

you can adjust the degree of dryness to achieve a particular dryness level. To 

increase the dryness level, set the degree of dryness to between 

 and 

This extends the programme duration but the temperature remains the same.
Once you have adjusted the degree of dryness for a dryness level, this setting is 

retained even after the appliance is switched off.

Trockenzeit 

(Drying Time) 

 

The drying time for 

timed programmes

 can be extended to up to three hours in 

10-minute increments.

Fertig in 

(Finished in)  

 

Before starting the programme

, you can delay the time at which the pro-

gramme ends by up to 24 hours.
The set time in hours, e.g. 8 h, is shown in the display and counts down until the 

programme starts. Once the programme has started, the programme duration is 

displayed.

Note:  

The programme duration is included in the "Ready in" time.

Knitterschutz 

(Less Ironing) 

 

The drum moves the laundry at regular intervals after drying to prevent creasing. 

You can activate or deactivate the automatic Anti-Crease function for 60 minutes 

(

 ) or for 120 minutes (

 ).

Schontrocknen 

(Gentle) 

 

Reduced temperature for delicate fabrics, e.g. polyacrylic or elastane, may 

increase the drying time.

Summary of Contents for WTR85TH1

















































Reviews: