Operating the appliance
en
27
Changing the programme or
adding more laundry
You can remove or add laundry and
change or adjust the programme at any
time during drying.
1.
Open the door or press
A
(Start/
Reload) to pause the programme.
Note:
The drum will continue to
rotate when the CoolDown process
is in progress, even if you have
paused the programme. You can
stop the CoolDown process at any
time by opening the door.
2.
Add or remove laundry.
3.
If required, select a different
programme or a different
programme setting.
Note:
Do not change the
programme during the CoolDown
process.
4.
Close the appliance door.
5.
Press
A
(Start/Reload).
Note:
The programme duration is
updated on the display, depending on
the load and on the residual moisture in
the laundry. The values displayed may
change when the programme or load is
changed.
Cancelling the programme
The programme can be cancelled at
any time by opening the door or
pressing
A
(Start/Reload).
Caution!
Risk of fire. Laundry may catch fire.
If you cancel the programme, remove all
items of laundry from the dryer and
spread them out to allow the heat to
dissipate.
End of programme
The following message appears in the
display:
“Ÿš
Removing laundry and
switching off the appliance
1.
Remove the laundry.
2.
Turn the programme selector to
switch off the appliance.
Emptying the condensation
container
By default, the condensation from the
appliance runs into the condensation
container.