en
Appliance settings
30
2
Appliance settings
Appliance settings
You can activate/deactivate or change
the appliance settings directly.
Childproof lock
You can activate or deactivate the
appliance's childproof lock. You can
activate the childproof lock to prevent
the control panel from accidentally
being operated.
Activate/deactivate the appliance
setting as follows:
Press and hold
5
(Drying Time) and
ñ
(Finished in) at the same time for
approx. three seconds.
E
is shown/hidden in the display.
The childproof lock is activated/
deactivated.
Notes
■
You can activate the childproof lock
at any time after you switch on the
appliance.
■
The childproof lock remains active
even after the appliance has been
switched off. In order to operate the
control panel when you turn on the
appliance, you need to deactivate
the childproof lock.
Notification signal
You can activate or deactivate the
notification signal at the end of the
programme. If you activate this setting,
an audible signal will sound once the
programme has ended.
Activate/deactivate the appliance
setting as follows:
Press
C
(Signal).
C
is shown/hidden in the display.
The notification signal at the end of
programme is activated/deactivated.
Note:
If a signal does not sound when
the programme ends even though the
notification signal is activated, you can
change the appliance setting.
Altering the appliance settings
You can call up and change the
following appliance settings:
■
Volume of the audible notification
signals (e.g. at the end of a
programme)
■
Volume of the audible operating
signals
■
Spin speed used for spinning the
laundry before drying
Call up and change the appliance
settings as follows:
1.
Set the programme to position 1.
2.
Press and hold
A
(Start/Reload).
At the same time:
3.
Set the programme to position 2.
4.
Release
A
(Start/Reload).
#
+
3
;
#
+
3
;
