Appliance care
en
55
Running the intensive
appliance care programme
You can run the intensive appliance
care programme to remove any
stubborn dirt deposits in the appliance
and odours after a downtime of more
than one month.
Notes
■
The intensive appliance care
programme runs for approximately 4
hours. The programme may take
longer if you do not carry out the
necessary steps in good time while
the programme is running.
■
Once it has started, the intensive
appliance care programme should
not be cancelled.
■
When you run the intensive
appliance care programme, you will
need to use the original appliance
care product. This can be ordered
from our after-sales service using
spare part number
00311829
.
Contact information for all countries
can be found in the enclosed after-
sales service directory.
:
Warning
Risk of injury/material damage/
damage to the appliance!
The use of spare parts and accessories
supplied by other brands is dangerous
and may result in injury, material
damage or damage to the appliance.
For safety reasons, use genuine spare
parts and accessories only.
Caution!
Material damage/damage to the
appliance
If you pour the wrong quantity of
detergent or cleaning agent into the
appliance, this may result in material
damage or damage to the appliance.
Use detergents/care products/cleaning
agents and softeners in accordance
with the manufacturers' instructions.
Run the appliance care programme as
follows:
1.
Prepare the appliance for appliance
care.
2.
Set the programme to position 1.
3.
Press and hold
ö
(Iron Dry). At the
same time:
4.
Set the programme to position 4.
’˜‚
and the programme duration will
now alternate on the display.
5.
Press
˜
.
’˜ƒ
and the programme duration
will now alternate on the display.
#
+
3
;
#
+
3
;
