Appliance settings
en
35
Altering the appliance settings
You can change the following appliance
settings under
œ
:
■
Volume of the audible operating
signals
■
Display brightness
■
Volume of the audible notification
signals (e.g. at the end of a
programme)
Call up
œ
as follows:
1.
Press
#
to switch on the appliance.
2.
Press and hold
Á
(Quiet drying) for
3 seconds.
œ
will be shown on the display.
You can now alter the appliance
settings.
Adjusting the volume of the audible
operating signals
1.
Set the programme to position 2.
›
and the current setting value will
appear on the display.
2.
Press and hold
˜
until the setting
value you require appears on the
display.
Setting values:
3.
Alter any additional appliance
settings you require or save and exit
the appliance settings.
0
Off
1
Low
2
Medium
3
High
4
Very high
#
+
3
;
