en
Cleaning
22
D
Cleaning
Cleaning
Cleaning the dryer and the
control panel
:
Warning
Risk of death!
There is a risk of electric shock as the
dryer is operated with electricity.
Disconnect the dryer from the mains
before cleaning.
Clean the dryer using only water and a
soft, damp cloth.
Remove all detergent residue, spray
residue or other residues immediately.
Do not use cleaning agents or agents
for pre-treating laundry (e.g. prewash
sprays, stain removers). Do not use
high-pressure cleaners or steam jet
cleaners to clean your appliance.
Cleaning the moisture sensor
Note:
The dryer is equipped with a
stainless-steel moisture sensor.
The moisture sensor measures how
damp the laundry is.
After long periods of use, a fine layer of
limescale can form on the moisture
sensors. This must be removed
regularly.
Open the door and clean the moisture
sensor with a rough sponge.
Caution!
The moisture sensor may be damaged.
Do not clean the moisture sensor with
steel wool and abrasive materials.