a
a
a
a
a
a
L
+
|
I
+
ʠ
ʠ
12
What to do if...
If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales service. We will
always find an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service technicians using
original spare parts. The contact details of your local after-sales service can be found in the enclosed after-
sales service directory.
When contacting the after-sales service, please quote the appliance's product number (E no.) and
production number (FD) (see under the loading door).
Turn the programme selector to
0 (Off)
and unplug the mains plug from the socket.
ʠ
The
(Start)
indicator lamp does not
light up.
Mains plug plugged in?
Programme selected?
Check the socket fuse.
ʠ
The display panel light and indicator
lights
(depending on model)
go out
and the
(Start)
indicator light
flashes.
Energy-saving mode is activated
a
see the separate
Energy-
saving mode
instructions.
ʠ
The
n
(Container)
indicator lamp
and the
(Start)
button are flashing.
Empty the condensate container
a
page 4
.
Clean the condensate container filter if necessary
a
page 9
.
Dryer transported?
a
Wait 2 hours and start again.
ʠ
The
.÷
(Filter)
indicator lamp and
(Start)
button are flashing.
Rinse the fluff filter under running water
a
page 4
.
ʠ
Cln
appears in the display panel.
Not an error. Automatic cleaning of the heat exchanger. Do not
empty the condensate container.
ʠ
Dryer does not start.
(Start)
button selected?
Door closed?
Ambient temperature greater than 5°C? The optimum ambient
temperature for drying is between 5 °C and 35 °C.
ʠ
Water is leaking out.
Make sure the dryer is level.
ʠ
The door opens by itself.
Push the door closed until you hear it click into place.
ʠ
Creasing.
Laundry load exceeded?
Remove articles of clothing immediately after the end of the
programme, hang up and pull into shape.
Unsuitable programme selected
a
page 7.
ʠ
Laundry is not dried correctly or is still
too damp.
After the end of the programme, warm laundry feels damper than it
actually is. Spread the laundry out and allow the heat to disperse.
Finely adjust the dryness level – this extends the drying time but
does not increase the temperature. Your laundry will become drier.
Select a programme with a longer drying time or increase the
drying level. This does not increase the temperature.
Select a time programme for extended drying of laundry that is still
damp.
If you have exceeded the maximum load for the programme, the
laundry may not be dried correctly.
Clean the moisture sensor in the drum. A fine layer of limescale
may adversely affect the performance of the sensors and your
washing will not dry properly.
Drying has been interrupted as a result of a power cut, because the
condensate container is full or because the maximum drying time
has been exceeded.
ʠ
Drying time too long.
Rinse the fluff filters under running water
a
page 4.
Insufficient supply of air
a
ensure that air can circulate.
Air inlet possibly blocked
a
Clear inlet
a
page 8
.
Ambient temperature higher than 35°C
a
ventilate the room. The
optimum ambient temperature for drying is between 5 °C and 35
°C. Outside of this range, the drying time may increase.
ʠ
The humidity in the room increases
significantly.
Make sure the room is sufficiently ventilated.
Air inlet blocked?
a
Keep clear.
ʠ
Power failure.
Remove laundry from the dryer immediately and spread out. This
allows the heat to dissipate. Be careful as the door, the drum and
the laundry may be hot.
ʠ
Other intermittent noises and
vibrations.
Not an error. Normal noises
a
page 11
.
ʠ
Loud humming noise for several
seconds.
Has the condensate container been properly inserted?
a
Push the condensate container all the way in.
Not an error. Normal noises
a
page 11
.
13
Safety instructions
Emergency
– Pull the appliance plug out of the socket immediately or disconnect the fuse.
ONLY use
the dryer...
– in rooms inside the house.
– to dry fabrics.
The dryer
must NEVER...
– be used for purposes other than those described above.
– be modified in terms of its technology or properties.
Hazards
– The dryer must not be used by children or persons who have not been instructed in
its use.
– Do not leave children unsupervised near the dryer.
– Keep pets away from the dryer.
– Remove all objects from pockets, and lighters in particular
a
Risk of explosion!
– Do not lean or sit on the door
a
Risk of tipping!
Installation
– Secure loose cables
a
Risk of tripping!
– Do not operate a dryer if there is a risk of frost.
Mains
connection
– Connect the dryer to an AC earthed socket according to specifications, otherwise it
cannot be guaranteed that the appliance is completely safe.
– The cable cross-section must be sufficient.
– Only use earth-leakage circuit breakers with the following symbol:
– The appliance plug and socket must be compatible.
– Do not use multiple plugs/connectors and/or extension cables.
– Do not touch or hold the appliance plug with wet hands
a
Risk of electric shock!
– Never pull the appliance plug out of the socket by its cable.
– Do not damage the mains lead
a
Risk of electric shock!
Operation
– Only load the drum with laundry.
Check the contents before you switch the dryer on.
– Do not use the dryer if the laundry has been in contact with solvents, oil, wax, grease
or paint (e.g. hair styling products, nail varnish remover, stain remover, cleaning
solvent, etc.)
a
Risk of fire/explosion!
– The tumble dryer is not to be used if industrial chemicals have been used
for cleaning.
– Dust (e.g. coal dust, flour) poses a danger: Do not use the dryer
a
Risk of explosion!
– Do not turn off the dryer until the drying process ends, unless the laundry will be
removed quickly and spread out, so that the heat can dissipate.
– Do not put laundry containing foamed material/rubber in the dryer
a
elastic
material may be destroyed and the dryer be damaged due to possible deformation
of the foamed material.
– When cleaning the fluff filter, make sure that no foreign material (down or filling
material) gets into the air duct opening. If necessary, clean the drum beforehand with
a vacuum cleaner. If foreign material should still get into the air duct
a
call the after-
sales service
a
Risk of fire/explosion!
– Light things, such as long hair, may be sucked into the air inlet of the dryer
a
Risk of injury!
– Final part of a tumble dryer cycle occurs without heat (cool down cycle), to ensure
that the items are left at a temperature that ensures that the items will not be
damaged.
– Switch off the dryer once the programme has ended.
– The water from condensation is not drinking water and may be contaminated
with fluff.
Defect
– Do not use the dryer if it is defective or if you suspect that it is.
Repairs must only be carried out by the after-sales service.
– Do not use the dryer if the mains cable is defective. To avoid danger, only have the
defective mains cable replaced by the after-sales service.
Spare parts
– Only use genuine spare parts and accessories for safety reasons.
Disposal
– Pull out the appliance plug,
then
cut off the mains cable from the appliance.
Dispose of at a municipal waste disposal facility.
– The dryer's heat exchanger contains fluorinated greenhouse (R134a) gas
in a hermetically sealed unit
a
dispose of in a proper manner. Capacity: 0.220 kg.
Total GWP: 0.315 tCO
2
.
– Packaging: Keep all packaging out of reach of babies and children
a
Risk of suffocation!
– All materials are environmentally sound and can be reused.
Dispose of in an environmentally-responsible manner.
