en
Signal setting
28
M
Signal setting
Signal setting
You can change the following settings:
■
The speed at which the washing
machine was spun; only used if the
anticipated drying time needs to be
displayed more accurately,
■
The volume of the audible signal at
the end of the programme,
■
The volume of the audible button
signals.
You will need to activate the setting
mode in order to change these settings.
Activating setting mode
1.
Switch the dryer on.
2.
Select the "Cottons" programme in
position 1 and wait for five seconds.
Setting mode is now activated.
The symbols go out in the display panel
and the programme duration is
displayed.
1.
Press and hold the Start button and,
at the same time, turn
the programme selector clockwise
to position 2.
2.
The
spin speed
is shown in
the display.
3.
Press the "Ready in" time button
or the drying time button to change
the spin speed.
4.
Turn the programme selector
clockwise to position 3.
5.
The volume of the
audible signal at
the end of the programme
is shown
in the display.
0 = off, 1 = quiet, 2 = medium,
3 = loud, 4 = very loud
6.
Press the "Ready in" time button
or the drying time button to change
the volume.
7.
Turn the programme selector
clockwise to position 4.
8.
The volume for the
audible button
signal
is shown in the display.
0 = off, 1 = quiet, 2 = medium,
3 = loud, 4 = very loud
9.
Press the "Ready in" time button
or the drying time button to change
the volume.
Exiting setting mode
Turn the programme selector to
the "Off" position once you have set
the required spin speed and
the volume. The settings have now
been saved.