en
Crease-removal function
52
6.
Use the water jug provided to pour
approx. 180 ml cold drinking water
into the filling hole in the
front
of the
appliance, until
Refresher-container
is empty, please re-fill.
goes out on
the display and an audible signal
sounds.
Note:
If you pour more than 180 ml
drinking water into the appliance and
Refresher-container is empty,
please re-fill.
does not go out on the
display, this means that the drinking
water has been poured into the
wrong filling hole or the appliance is
not fully level. Pour the drinking
water into the filling hole on the front
or make the appliance level.
7.
Push the condensation container
back into the appliance until you feel
it lock into place.
8.
Press
Inicio/Pausa+Carga (Start/
Pause)
A
.
Programs for removing
creases
■
Do not run crease-removal programs
without a load in the drum. Comply
with the washing instructions on the
clothing label and do not exceed the
maximum permitted load for the
crease-removal
■
Opening the door during a crease-
removal program pauses the
program. To resume the program,
close the door and press
Inicio/
Pausa+Carga (Start/Pause)
A
.
■
Crease-removal programs run for
approx. 45 minutes on average.
They may run for longer at low
ambient temperatures; at high
ambient temperatures, the run time
may be reduced.
■
There may be some extra noise
when a crease-removal program is
running.
■
Crease removal results may vary
depending on the type of fabric, the
amount of laundry and the selected
program. For best results, take the
laundry out of the machine as soon
as the program comes to an end,
hang it on a clothes hanger to finish
drying and reshape it while still
damp.
Summary of Contents for WTX87EH0ES
Page 75: ...6 ...