Home Connect
en
41
Notes
■
If the smart energy system (Energy
manager) does not start your
appliance, the programme will still
be started before the set time period
ends.
The programme will end when the
time period ends.
■
For safety reasons,
Remote Start
and in turn the
Flex Start
function
will be deactivated in the following
circumstances:
– Press
A
(Start/Pause).
– Open the door.
– Programme end.
– Press
#
to switch off the
appliance.
– Power failure.
If the
Flex Start
function is
deactivated, the
ñ
(Ready in) will
remain active.
Adding more laundry or removing
laundry:
Note:
If the
Flex Start
function has
already been activated but the
programme has not yet started, you will
still be able to load more laundry or
remove some from the drum.
1.
Press
A
(Start/Pause)
.
2.
Open the door.
3.
Add or remove laundry.
4.
Close the door.
5.
Press
A
(Start/Pause)
.
6.
Press
(Remote Start)
}
.
The
FlexStart
function has now been
activated and the appliance will wait to
be remotely started by the smart energy
system (Energy manager).
Information on data protection
When your appliance is connected for
the first time to a Wi-Fi network, which is
connected to the Internet, your
appliance transmits the following
categories of data to the Home Connect
server (initial registration):
■
Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
installed Wi-Fi communication
module).
■
Security certificate of the Wi-Fi
communication module (to ensure a
secure data connection).
■
The current software and hardware
version of your household appliance.
■
Status of any previous resetting to
factory settings.
This initial registration prepares the
Home Connect functions for use and is
only required when you want to use
these Home Connect functions for the
first time.
Note:
Ensure that the Home Connect
functions can be used only in
conjunction with the Home Connect
app. Information on data protection can
be accessed in the Home Connect app.
Declaration of Conformity
Robert Bosch Hausgeräte GmbH
hereby declares that the appliance with
Home Connect functionality meets the
basic requirements and other relevant
provisions of the Directive 2014/53/EU.
A detailed RED Declaration of
Conformity can be found online at
www.bosch-home.com among the
additional documents on the product
page for your appliance.
2.4 GHz band: max. 100 mW
