20
pro.Bose.com
Technical Information
Panaray
®
802
®
Series IV Loudspeaker Specifications
Panaray
®
802
®
Series IV
System Performance
Frequency Range (-10 dB)
(1)
52 Hz – 15 kHz
Recommended High-Pass Protection Filter
55 Hz with minimum 12 dB / octave filter
Nominal Coverage Pattern
120° H x 100° V
Loudspeaker EQ
active EQ required for optimal performance
Overload Protection
power limiting circuit (non-fused; automatic reset)
Bose extended-lifecycle test
(2)
AES component test
(3)
Power Handling, long-term continuous
240 W
300 W
Power Handling, peak
960 W
1200 W
Free field
Free field
Sensitivity (SPL / 1 W @ 1 m)
(4)
92 dB
92 dB
Calculated Maximum SPL @ 1 m
(5)
116
117
Calculated Maximum SPL @ 1 m, peak
122
123
Transducers
Full-range Drivers
8 x Bose 4.5
LQFK
(114 mm) full-range cone transducers
Nominal Impedance
8 ohms
Physical
Enclosure Material
mineral-reinforced HDPE
Grille
power-coated steel grille
Environmental
outdoor per IEC 529 IP55
Connectors
2 x Neutrik
®
NL4 wired parallel
Suspension / Mounting
8 x M8 threaded inserts (2 back, 2 bottom, 4 sides)
Dimensions (H xW xD)
336 mm x 523 mm x 335 mm (13.2
Ǝ
x 20.6
Ǝ
x 13.2
Ǝ
)
Net Weight
13.6 kg (30 lb)
Shipping Weight
17.2 kg (38 lb)
Product Code
Black
739058-0110
Notes:
1. Frequency range measured on-axis with recommended EQ in an anechoic environment.
2. Bose extended-lifecycle test: pink noise, IEC268-5 filtered, 6-dB crest factor, 100-hour duration, with recommended EQ.
3. AES component test: pink noise, IEC268-5 filtered, 6-dB crest factor, 2-hour duration, with recommended EQ.
4. Sensitivity measured in anechoic acoustic boundary conditions with recommended EQ, referenced to 1 W/m.
5. Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression.
For additional specifications and application information, please visit pro.Bose.com. Specifications subject to change without notice.