21
Technical Information
pro.Bose.com
Panaray
®
402
®
Series IV Loudspeaker Specifications
Panaray
®
402
®
Series IV
System Performance
Frequency Range (-10 dB)
(1)
73 Hz – 15 kHz
Recommended High-Pass Protection Filter
75 Hz with minimum 12 dB / octave filter
Nominal Coverage Pattern
120° H x 60° V
Loudspeaker EQ
active EQ required for optimal performance
Overload Protection
power limiting circuit (non-fused; automatic reset)
Bose extended-lifecycle test
(2)
AES component test
(3)
Power Handling, long-term continuous
120 W
150 W
Power Handling, peak
480 W
600 W
Free field
Free field
Sensitivity (SPL / 1 W @ 1 m)
(4)
91 dB
91 dB
Calculated Maximum SPL @ 1 m
(5)
112
113
Calculated Maximum SPL @ 1 m, peak
118
119
Transducers
Full-range Drivers
4 x Bose 4.5
LQFK
(114 mm) full-range cone transducers
Nominal Impedance
8 ohms
Physical
Enclosure Material
mineral-reinforced HDPE
Grille
power-coated steel grille
Environmental
outdoor per IEC 529 IP55
Connectors
2 x Neutrik
®
NL4 wired parallel
Suspension / Mounting
7 x M8 threaded inserts (4 back, 2 bottom, 1 top)
Dimensions (H xW xD)
592 mm x 206 mm x 202 mm (23.3
Ǝ
x 8.1
Ǝ
x 8.0
Ǝ
)
Net Weight
7.3 kg (16 lb)
Shipping Weight
9.1 kg (20 lb)
Product Code
Black
739706-0110
White
739706-0210
Notes:
1. Frequency range measured on-axis with recommended EQ in an anechoic environment.
2. Bose extended-lifecycle test: pink noise, IEC268-5 filtered, 6-dB crest factor, 100-hour duration, with recommended EQ.
3. AES component test: pink noise, IEC268-5 filtered, 6-dB crest factor, 2-hour duration, with recommended EQ.
4. Sensitivity measured in anechoic acoustic boundary conditions with recommended EQ, referenced to 1 W/m.
5. Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression.
For additional specifications and application information, please visit pro.Bose.com. Specifications subject to change without notice.