background image

Chapter-1 

Introduction 

The HS-5010 is an all-in-one full-size card with a full features in a small package 
for the industrial applications. The Intel VX chipset provides major core logic, in 
addition to the support for various CPU, it also includes Intel MMX.  

The HS-5010’s integral switch system provides a wide range of power regulation 
from 2.8V to 3.45V to maintain a constant temperature between 50°C and 60°C. 
The HS-5010 has designed with a feature of on board temperature sensor. If the 
temperature range up to 60°C, then the warning buzzer alarm will be triggered 
until the temperatures stabilized. 

The HS-5010 supports VGA equipped using S3 86C775 chipset with 2MB 
memory. The HS-5010 takes advantage of both 32bit PCI and 16bit ISA bus to 
provide high performance graphics accelerator. VGA resolution is supported up 
to 1024 by 768, at 256 colors, with a reserved internal 10pin VGA connector to the 
monitor. 

The HS-5010 provides an optional DiskOnChip

TM

 socket supports the memory 

up to 72MB. That means you can issue commands directly from DOS, and you 
don’t need any other driver or application. 

USB and IR ports are also on board to r eserve the upgrade space for the interface 
transmission. 

Additional safety features include the HS-5010 polyswitch resettable fuse 
system. In the event of the keyboard, PS/2 mouse, or USB circuit short, the fuse 
breaks the contact. Resumption of the normal power flow will, however, prompt 
an automatic reconnection without any reinstallation. 

Summary of Contents for HS-5010
































Reviews: