5
Chapter 2
Unpacking
2.1 Opening the Delivery Package
The HS-6050 is packed in an anti-static bag. The board has
components that are easily damaged by static electricity. Do not
remove the anti-static wrapping until proper precautions have been
taken. Safety Instructions in front of this manual describe anti-static
precautions and procedures.
2.2 Inspection
After unpacking the board, place it on a raised surface and carefully
inspect the board for any damage that might have occurred during
shipment. Ground the board and exercise extreme care to prevent
damage to the board from static electricity.
Integrated circuits will sometimes come out of their sockets during
shipment. Examine all integrated circuits, particularly the BIOS,
processor, memory modules, ROM-Disk, and keyboard controller chip
to ensure that they are firmly seated. The HS-6050 delivery package
contains the following items:
HS-6050 Board x 1
Utility CD Disk x 1
ATA/100 IDE flat cable x 2
FDD flat cable x 1
Printer cable with bracket x 1
RS-232 COM Port cables with bracket x 1
8-pin USB split type cable with bracket x 1
MIC/Audio 8-pin cable + 2 phone jacks with bracket x 1
Jumper Bag x 1
User’s Manual
IMPORTANT:
The default setting of JP1 is Short 1-2. Before you turn on
the power of your system, please check JP1 to Short 1-2 for
normal operation.
Summary of Contents for HS-6050
Page 6: ...This Page is intentionally left blank...
Page 10: ...4 1 3 Board Dimensions...
Page 14: ...8 3 2 Board Layout...
