10
Connector
Definition
CN27
COM 1 Connector (DB9)
DM1, 2, 3
168-pin DIMM Socket
FN1
FAN1 Connector
FN2
FAN2 Connector
JP8
Line Out/MIC In Connector
3.5 Configuring the CPU
The HS-6050 offers the convenience in CPU installation with its
auto-detect feature. After installing a new microprocessor onboard, the
HS-6050 automatically identifies the frequency and clock speed of the
installed microprocessor chip, thereby eliminating the need for user to
do additional CPU configuration or hardware settings related to it.
3.6 System
Memory
The HS-6050 provides three DIMM sockets at locations
DM1, DM2
and
DM3
. The maximum capacity of the onboard memory is 1.5GB.
3.7 DiskOnChip
Address Setting
The DiskOnChip
function allows the system to boot or operate
without a FDD or a HDD. DiskOnChip
modules may be formatted as
drive C or A. With DiskOnChip
, user may also execute DOS
commands such as FORMAT, SYS, COPY, XCOPY, DISCOPY and
DISKCOMP etc.
The U18 location onboard the HS-6050 is the DiskOnChip
module
socket. Jumper
JP5 (1-4)
assigns the starting memory address of the
installed module. If you have another memory device that has a similar
memory capacity with that of the DOC in your system, please set both
at different memory address mapping to avoid the mapping area
conflicts. Failing to do so will not make the HS-6050 and the additional
memory device function properly.
JP5(1-4): DiskOnChip
Address Select
Address
PINS 1-2 PINS 3-4
* D000
Short
Short
D800
Open Short
Summary of Contents for HS-6050
Page 6: ...This Page is intentionally left blank...
Page 10: ...4 1 3 Board Dimensions...
Page 14: ...8 3 2 Board Layout...
