8. How to measure Surface Temperature
Important: Prior to the first use remove the safety strip
in the battery compartment.
Prior to every measurement, fit a new undam-
aged Probe Cover on the measuring probe.
Failure to do so may result in incorrect temper-
ature measurement.
Only in ambient temperature ranges of
10° C - 40° C (50° F-104° F) correct measure-
ment results could be obtained.
1. Press the O/I button. The LCD is activated
to show all segments for 2 seconds.
2. The last measurement reading will be shown
on the display automatically for two seconds
with the „M“ icon.
3. When the °C or °F icon is flashing, a beep
sound is heard and the thermometer is ready
for the measurement.
4. Keep the probe upright in approx. 5 cm distance in direction
of the surface.
5. Press the „Start“-button. A beep sound confirms the end of
measurement.
6. To repeat a measurement, please wait until the °C-/°F-
Symbol starts flashing.
7. Approx. one minute after the last measurement the unit swit-
ches off automatically.
NOTE:
•
Please do not forget that you are only mesuring the sur-
face temperature. The inner temperature of liquid/food
maybe much higher!
Therefore take care that the liquid/food is mixed
thoroughly.
26
bosotherm_medical_1510sd.qxd 16.10.2015 10:
Summary of Contents for bosotherm medical
Page 77: ...77 ...
