59
Measurement display
Blood pressure is a dynamic parameter and
can be affected by the patient’s position,
e.g. sitting, standing, lying, moving, before
or during the measurement, physical con-
dition (stress, disease, etc.).
➡
If the measurement result is obviously
wrong, repeat the measurement.
The unit switches itself to time display
mode automatically after about 1 min. To
repeat a measurement,
press the
START/STOP button again
briefly
.
Allow at least two minutes be-
tween measurements.
➡
If no further measurement is required,
remove the cuff from the arm.
➡
Enter each individual value in your
record card.
2
min
medicus_PC2_1411sd.qxd 20.10.2014 6:47 Uhr Seite 59
