Troubleshooting
Problem
Possible Cause
Corrective Action
1. The hose is bad.
1. Check the hose for leaks. Apply thread
locking compound to the connection or
replace the hose.
2. The cylinder is bad.
2. Replace the cylinder.
Oil leaks from the hydraulic cylinders.
3. The cylinder rod is pitted.
3. Polish the rod with steel wool.
The blade trips too easily.
1. The trip springs are loose or damaged.
1. Tighten the springs or replace them if
they are damaged.
10
Summary of Contents for MSC14175
Page 11: ...Notes ...
Page 12: ......
