background image

63

Chap.5

Chapter 5. Recording a Song

●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●

You can record up to 100 songs.

Each song can contain up to 250 patterns, and all songs 
together can total up to 10,000 patterns.

●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●

Realtime Recording

This method lets you select and play patterns, and record 
your selections immediately as a song.

NOTE

It is not possible to realtime-record onto an already-recorded song.

1.

Press [SONG/PTN] so the display indicates 
“PATTERN.”

Pattern mode will be selected.

2.

Use [VALUE*] to select the pattern that you want to 
record first.

3.

Press [SONG/PTN] so the display indicates “SONG.”
The DR-770 is now in Song mode.

4.

Press [REAL/STEP] so the display indicates “REAL.”
Realtime Recording will be selected.

5.

Use [VALUE*] to select the song that you want to 
record.

6.

Press [REC].
The REC indicator will light.

7.

Press [START] to begin recording.
At the moment you press [START], the first-selected 
pattern will begin playing.

The tempo indicator will blink on each beat.

fig.105-01a

NOTE

The playback will continue repeating (and being recorded) until 

you select the next pattern to record.

8.

Use [VALUE*] to select the pattern that you want to 
record next.

In the case of an Original pattern for which you have 
made Realtime Pattern Change settings (p. 50), the Fill-
in and Variation patterns you select by pressing 
[START] [RWD] [FWD] will be recorded just as you 
select them.

9.

Repeat step 8 as many times as desired to record 
enough patterns for your song.

NOTE

If the number of parts reaches 250, recording will stop 

automatically.

10.

To stop recording, press [STOP/EXIT].

Using the DPP Function to 
Realtime Recording

1.

Press [SONG/PTN] so the display indicates “SONG.”

The DR-770 is now in Song mode.

2.

Press [REAL/STEP] so the display indicates “REAL.”
Realtime Recording will be selected.

3.

Use [VALUE*] to select the song that you want to 
record.

4.

Press [REC].
The REC indicator will light.

5.

Press [DPP] so the display indicates “DPP.”
The DR-770 is now in DPP mode.

6.

Press a pad to which the Pattern to be recoreded first is 
assigned.
The Pattern will be played and the recording will be  
started at the same time.

NOTE

The playback will continue repeating (and being recorded) until 

you select the next pattern to record.

7.

Select the Pattern to be recorded next by pressing the 
relevant pad.

8.

Repeat step 7 as many times as needed.

9.

To stop recording, press [STOP/EXIT].

PAD BANK

FUNC

MODE

A

B

TEMPO   

DPP

DRUM KIT

REVERB  IND

FLANGER

PATTERN

SONG

PAD NUMBER

INSERT
COPY
DELETE

SONG

PATTERN
PAD
UTILITY

REAL

STEP

EFFECTS

MIDI

QUANTIZE
NEXT PTN

PART

BEAT
LENGTH

PATTERN

Song number

Part number

Pattern to be recorded

(number / name)

Summary of Contents for Dr. Rhythm DR-770





























































































































Reviews: