background image

85

Chap.9

Chapter 9. Connecting External MIDI Devices

What Is MIDI?

MIDI (Musical Instrument Digital Interface) is an 
international standard which provides for the exchange of 
music data among electronic musical instruments and 
computers. Devices that have MIDI connectors can be 
connected via MIDI cable and used to transmit and receive 
data.

MIDI Connectors

The DR-770 has a MIDI IN connector and a MIDI OUT 
connector.

fig.109-01a

MIDI In

This connector receives data from an external MIDI device. 
Connect it to the MIDI OUT connector of the external MIDI 
device.

MIDI Out

This connector transmits data from the DR-770. Connect it to 
the MIDI IN connector of the external MIDI device. If the 
“MIDI Thru Switch” (MIDI mode setting; p. 88) is turned 
ON, data received at MIDI IN will be re-transmitted without 
change from MIDI OUT.

MIDI Channels

MIDI uses the concept of MIDI channels (channels 1–16), 
which are somewhat analogous to television channels. Data 
is received only if the MIDI channel of the receiving device 
matches the MIDI channel on which the data is being 
transmitted.

fig.109-02a

If MIDI channels are set as shown below, only sound module 
B will produce sound when the keyboard is played.

fig.109-03a

MIDI Messages Used by the 
DR-770

MIDI uses many different types of messages to convey a 
wide range of musical information. MIDI messages can be 
classified broadly into messages that are handled separately 
for each MIDI channel (“channel messages”), and messages 
that are handled without regard to the MIDI channel 
(“system messages”).

Messages Handled Separately for Each 
MIDI Channel (Channel Messages)

These messages are used to convey musical performance 
actions.

Note Messages

The DR-770 uses these messages to convey drum 
performance information. On a keyboard instrument, they 
convey information about which notes are played. Note 
messages include the following information.

Note Number:

Data that specifies the instrument (the 
number of the pad to which the instrument is 
assigned)

Note On:

A pad is struck

Note Off:

A pad is released

Velocity:

The force with which the pad was struck

The note number is a value from 0 through 127, and middle 
C (C4) is 60. On the DR-770, a different note number is 
assigned to each instrument of a drum kit.
This means that each note number will play a different 
instrument.

NOTE

The DR-770 uses note numbers 27–81.

Program Change Messages

The DR-770 uses these messages to switch drum kits.

Control Change Messages

These messages can be used to control the overall volume of 
the DR-770.

Broadcasting

Station A

T.V. information from many different broadcasting station is 
sent through an antena.

Select the channel of the 
broadcasting station you 
wish to watch

Broadcasting

Station B

Broadcasting

Station C

MIDI
OUT

MIDI IN

Sound 
Module A

Transmit Channel: 1

Receive Channel: 2

Receive Channel: 1

MIDI THRU

MIDI IN

Sound 
Module B

Summary of Contents for Dr. Rhythm DR-770





























































































































Reviews: