7
If the tower is to be used at this height (2.2m platform height)
climb the ladder to the platform.
IMPORTANT!
Engage interlock clips (
D
), on the top
U-brackets, at
both
ends of each guardrail frame. Fit the
toeboard clips and add toeboards (see page 29).
The tower is now complete for the 2.2m platform height.
Assembly Procedure - Advanced Guardrail
25
8
When building a tower higher than a 2.2m platform tower,
omit step
7
and proceed as follows from step
6
.
Fit a fourth diagonal brace, in the opposite direction, on the
other side of the tower, between the 3
rd
and 5
th
rungs. Climb
the ladder to the platform and fit 2 horizontal braces on each
side of the tower, on the 5
th
and 6
th
rungs (0.5m and 1.0m)
above the platform. These braces will become the platform
guardrails
when the
advanced
guardrail is
moved up the
tower. Add an
additional end
frame at each
end of the
tower and
engage the
frame interlock
clips.
x2
each
frame
D
