- 3 -
Mounting
See the section “Installation Precautions” on page 2.
Keep connection cables away from any pinch points, moving parts, or any hot exhausts.
Do not install the speakers where they may obstruct the rider’s view or inhibit any safety
features on the vehicle (e.g. lights, horns, brake levers, etc.).
To ensure security of the mounted speakers, always check the mounting conditions (e.g.
clamp fastening) of the speakers before each vehicle ride.
1.
Find a safe and ideal mounting location on the handlebar. Make sure the speakers will not
obstruct the rider’s view or any safety features.
2.
The supplied clamp is pre-attached to the bottom of the speaker. Unfasten the clamp through the
mounting nuts.
3.
Fit the clamp around the handlebar of your vehicle. Remember to attach the supplied rubber
shims over the mounting bar to secure clamping and prevent abrasion.
4.
Re-fasten the mounting nuts to tighten the clamp. Before fully tightening, adjust the speaker so it
points directly at the rider.
d
a
a
b c
Mounting inline function knob
Mount the function knob in a safe, easy-to-access location where it will not impede the rider’s ability
to drive safely. Secure the function knob using a supplied zip tie
.
a.
Mounting nut
b.
Rubber shim
c.
Speaker clamp
d.
Mounting bar (0.75” - 1.25” in diameter)
