20
Settings for the Entire SY-1000 (System Parameters)
Settings for the SY-1000
Here you can make settings that are common to the entire SY-1000
(system parameters).
For details on each parameter, refer to “SYSTEM Parameters” (p. 81).1
1 .
Press the [SYSTEM] button.
MEMO
You can use the [
K
] [
J
] (PAGE) buttons to see additional items.
2 .
Press a [1]–[6] knob to select the item that you want
to edit.
A sub-menu appears.
3 .
Once again press a [1]–[6] knob to select the item
that you want to edit.
4 .
Use knobs [1]–[6] to select parameters or edit the
values.
MEMO
The method of selecting parameters and editing their value will
differ depending on the item.
Restoring the Factory Default Settings (Factory
Reset)
Restoring the SY-1000’s settings to their original factory default
settings is referred to as “Factory Reset.”
Not only can you return all of the settings to the values in effect when
the SY-1000 was shipped from the factory, you can also specify the
items to be reset.
* When you execute “Factory Reset,” the settings you made will
be lost. Save the data you need to your computer using the
dedicated software.
1 .
Press the [SYSTEM] button.
2 .
Use the
[
K
] [
J
] (PAGE) buttons to select “FACTORY
RESET.”
3 .
Choose the type of settings to be restored to the
factory default settings with knobs [1] and [6].
Knob
Explanation
[1]
Specifies FROM.
[6]
Specifies TO.
Value
Explanation
SYSTEM
System parameter settings
U01-1–U50-4
Settings for Patch Numbers
U01-1–U50-4
VARIATION
Settings for VARIATION
4 .
Press the [WRITE] button.
Press the [6] knob to execute the factory reset.
To cancel factory reset, press the [5] knob.
Once the Factory Reset is complete, you are returned to the Play
screen.
Turning Off the Auto Off Function
The SY-1000 can turn off its power automatically. The power will turn
off automatically when 10 hours have passed since you last played or
operated the unit. The display will show a message approximately 15
minutes before the power turns off.
With the factory settings, this function is turned “ON” (power-off in 10
hours). If you want to have the power remain on all the time, turn it
“OFF.”
1 .
Press the [SYSTEM] button.
2 .
Choose “HARDWARE SETTING”
0
“OTHER.”
3 .
Use the [1] knob to select “OFF.”
4 .
Press the [EXIT] button a number of times to return
to the play screen.
