Various Settings (Menu)
14
Parameter
Value
CC OUT
Specifies whether control change
messages are transmitted (ON) or not
(OFF).
ON, OFF
PARAM1 CC
Specifies the controller number
corresponding to each controller.
OFF, #1–31, #64–95
PARAM2 CC
PARAM3 CC
D. LEVEL CC
E. LEVEL CC
ON/OFF SW CC
CTL1 CC
CTL2 CC
CTL3 CC
EXP CC
EFFECT CC
SYNC
Specifies the tempo clock to which this
unit synchronizes.
INTERNAL:
Synchronizes to the internal
tempo.
AUTO:
Normally synchronizes to the
internal tempo, but if a MIDI clock is
received via the MIDI IN connector, the
tempo synchronizes to the MIDI clock.
If you’re using the SY-200 as a remote
device, choose “AUTO.”
CLOCK OUT
Sets whether to output the internal clock.
ON, OFF
Parameter
Value
MIDI THRU
Specifies whether MIDI messages received
at the MIDI IN connector are retransmitted
as-is from the MIDI OUT connector (ON) or
are not retransmitted (OFF).
ON, OFF
MIDI PC MAP
Use the program change map to customize which
memories on the SY-200 correspond to which program
change messages sent from an external MIDI device,
switching to the memory in question.
Parameter
Value
PC#1–PC#128
OFF, 1–128:
Sets the memory number
(1–128) that corresponds to the program
number.
If this is “OFF,” the effect turns off.
