NOTICE
●
Do not use the machine in high
temperature environment.
●
Place the micro-filter in operation to
prevent from motor breaking down.
●
Stop operating when the inlet and
exhaust hole are blocked.
Otherwise the machine will be
deformed by overheat.
●
Please install wet filter for use with wet
pick-up. After wet pick-up, please
pouring the residul water and clean
the tank. Dry the tank completely.
※
Attention : only for the water sucking
vacuum cleaner
●
Please turn off the power and
disconnect the piug while
installation or maintenance to
avoid electric shock and injury.
●
Do not pull the wire to loosen the plug
from the outlet. Otherwise, it may cause
fire due to short circuit.
●
Please take off the plug form the
socket when the machine doesn’t
operate to prevent electric leakage,
electric shock or fire.
●
Please do not bend, trample on the
wire. Also, do not pull it suddenly to
cause damage.
●
Place the filter and paper bag before
operation to prevent form the motor
breaking down.
●
Please do not bend or pull the plastic
tube. Also, do not trample on and put
heavy objects on it to prevent damage
and deforation.
●
Please install the filtration system
and filter before using. Otherwise, it
will cause the motor breakdown.
●
Do not touch the plug, power or wire
with wet hands to prevent electric
shock.
●
Please keep the machine away
from fire and heat to reduce the
risk of fire and wire short.
●
The life time of the filter depends on
its frequency and condition.
Change the filter regularly for
maintenance.
●
Please do not use the machine in
high temperature environment. It will
cause damage, electric shock and fire.
Please use this machine under 80%
humidity.
●
Please do not keep the sewage
and debris in the tank for long time
to prevent the odour.
●
Hot air will exhaust from the cooling system
which at the top of the machine for normal
operation.
●
Please do not pick up too much dust
to cause block of the dust box or
motor breakdown.
●
When operate the machine under dry
environment (especially in winter), static
electricity may be occurred at the frame and
part of the machine. Please notice.
02
