Advance Configuration
User can set up Telnet, HTTP, RTP port on this page and view DHCP table.
1. Net Service configuration
Configuration Explanation:
Configure web browse port, the default is 80 port, if
you want to enhance system safety, you'd better change it into non-80 standard port;
Configure Telnet port the default is 23 port;
Enable RTP initial port configuration. It is dynamic
allocation;
Configure the maximum quantity of RTP port. The
default is 200;
Leased IP-MAC correspondence table of DHCP;
The configuration on this page needs to be saved after modified and will go into effect
after restarting.
If the Telnet, HTTP port will be modified, the port is better to be set as greater than
1024,because the 1024 port system will save ports.
Set the HTTP port as 0 then the http service will be disabled.
，
※
※
※
，
To dial the last number:
Your phone keeps the last 10 numbers you have dialed and allows you to retrieve the
numbers.
To view and dial any of the last 10 numbers:
1. Press the
button in Standby mode.
2.Press the
button to dial the number.
1. Press the
button in Standby mode.
3. Press the
button to dial the number.
Result:
The LCD window displays the last number you dialed.
When no numbers are found,
is displayed.
2. If you want to scroll through the memory, press the
or
button until you find
out the number you want to call.
1. Press the
button.
2. Scroll to the number you want to delete by using the
or
button.
3. When the number appears on the display, press the
button.
4. Press the
button.
1. Press the
button.
2. Press the
or
button to choose
, then press the
button.
3. Enter the PIN, then press the
button.
4. Press the
button.
Notes:
When the redial memory storage is full, each time you dial a new number, the oldest number
stored in the redial memory is automatically erased, and the redial memory is updated.
You can modify the displayed number before pressing the
button by using
button.
The display prompts you to confirm the deletion.
You hear a beep and the phone returns to Standby mode after clearing the memory number.
The LCD window prompts you to enter the PIN. The PIN is preset to "0000" at the factory.
The phone prompts you to confirm the deletion.
To delete a specific number in the Redial memory:
To delete all numbers in the Redial memory:
Result:
Result:
Result:
Result:
Last Number Redial
C/R
MENU
12
43
