GK detection interval time configuration, the unit is second;
Configure the phone to detect GK automatically.
Enable the phone's auto-swap to GK;
User can configure specific parameter of SIP signalling protocol on this page;
2. SIP configuration
Configuration Explanation:
show SIP register state; if register successfully, there will
show Registered in the square bracket, otherwise show Unregistered;
Configure SIP register server IP address;
Configure SIP register server signal port;
Configure SIP register account usually it is the same
with the port number that configured, some special SIP servers will have different port
configurations, then the port configuration needs to be configured to be numbers, here
the configuration account can be arbitrary character string);
（
：
This icon blinks
when the handset
is out of range.
If the handset is too far from the registered base, the handset cannot properly engage the
telephone line. The
icon at the top left of the LCD window blinks to warn you and the
signal strength indication bars next to the
icon disappear.
If you carry the handset too far from the base unit during a call, the telephone line might
be disconnected and the handset returns to Standby mode. Check if there is noise or
static. If so, move the handset closer to the base station.
Out of Range Indication
With the Smart Dial feature, your phone displays the full phone number when you enter
the first digit(s) of the number provided that the number is currently stored in your
phone's memory (for example, stored in the phonebook, received or dialed recently).
To place a call using the smart dial feature:
1. In Standby mode, enter the first digit(s) of the desired phone number.
Result:
The phone searches for the matching phone number from memory (in the order of outgoing
calls, Phonebook, incoming calls), then displays the first available number. Numbers blink
except for the part of the number you entered.
2. If the number is not the one you want, enter the remaining digits until you see the
desired number.
3. Press the
button to dial the number displayed. Or press the
button to exit
this smart dial mode.
Smart Dialing
1. Press the
button.
2. Press the
or
button to choose
, then press the
button.
3. Press the
or
button to choose
or
. To enable this feature, select
.
4.Press the
button to save the selection.
You can select to enable or disable the
feature. To change the setting:
Result
: The current setting is displayed.
Smart Dialing
MENU
C/R
15
40
