User can configure specific parameter of H323 signalling protocol on this page;
VOIP Configuration
1. H.323 configuration
Configuration Explanation:
show H323 register state; if register successfully, there
will show Registered in the square bracket, otherwise show Unregistered;
Configure default GateKeeper IP address;
Configure default GK port;
Configure default GK ID if no special requirement
of GK, user don't need to fill in anything;
The system initiates Q931signal port, the default is
1720;
Configure the net gate RAS register port for the system;
terminal user can logon to gatekeeper through RAS passage and make a request for
allowing to initiate the call request.
If the request has been allowed, then the gatekeeper will return a transport address with
IP address and port number as the call signalling passage of the called party;
；
（
）
To access a menu option:
1. To display menu items, press
the button.
3. To select an option, press the
button when the option you want appears in the
LCD window.
4. Repeat if necessary.
2. To scan through menu options, press the
or
button repeatedly.
If you press the
button from any menu
the
phone returns to the previous screen.
To return to Standby mode from any menu, press the
button or the
button, or
press and hold the
button.
Also, the phone will automatically return to Standby mode from any menu if no button
is pressed for about 30 seconds.
To return to Standby mode from any menu:
(not in the number or text input mode)
Menu Navigation
1. Store Phone (see page 18)
2. Call Log (see page 13)
3. Call by Call (see page 19)
4. Key Beep (see page 20)
5. Ring
Ring Type (see page 21)
Ring Level (see page 11)
VIP Ring (see page 21)
6. PIN Change (see page 22)
7. Smar t Dial (see page 15)
8. Access Code (see page 22)
9. Register (see page 23)
10. HS Reset (see page 24)
11. Clr Redial (see page 12)
12. Clr Call Log (see page 13)
13. Select Base (see page 24)
*
*
*
*
*
*
*
Menu Map
14. Base Menu
Call Bar (see page 25)
Dial Mode (see page 8)
Time Set (see page 8)
Release (see page 26)
PIN is required to access these menus.
*
*
Note:
If there are several handsets registered
to the base unit and if there is anyone
who is using the Base Menu, you cannot
access the Base Menu until the other
handset has finished.
Advanced Menu Functions
MENU
C/R
MENU
C/R
17
38
