Installation
1. Remove the LAN cable for Internet connection from your PC and connect it to "WAN"
port of the base.
2. Connect the power adapter in the box to "Power".
3. Find LAN cable in the box and connect between "Lan" port and your PC (PC is not
required for set up or making a call.) .
Configuration with WEB
The IP Phone Web Configuration Menu can be accessed by the following default LAN IP
address "
". Before accessing the web, you must do the following steps:
1. Open the "
" window.
192.168.10.1
Local Area Connection Properties
Make Phone Calls
To dial a PSTN number or a number on the proxy, you might need to enter in some prefix
number (you can change the lifeline prefix in the configuration web, for details, see page
48) followed by the phone number. We recommend to dial # after the number, this will
improve the speed of getting through the line.
5. Press and hold the
button on the base for more than 5 seconds, then the IN
USE indicator starts to blinks. Then release the button.
6. Press the
button.
7. Enter your phone's AC (Authentication Code), and press the
button. The AC is
"0000".
Result:
Result:
The LCD window prompts you to enter AC.
When the registration is properly completed, the LCD window displays the handset number,
and returns to Standby mode.
AC remains the same even if you want to register other handsets from different manufacturers to
this base.
Note:
Registering a New Handset (Continue)
Press
this button.
PAGE
If you reset the handset, all the user-selectable features including Phonebook,
incoming and outgoing call numbers and other settings return to the initial setting
at the time of purchase.
To reset your handset:
1. Press the
button.
2. Press the
or
button to choose
, then press the
button.
3. Enter the PIN, then press the
button.
4. Press
button to confirm the reset.
Resetting Handset
MENU
24
31
