23
4.4 RDP Connections
To create a new RDP connection, use the
Terminal Connection Wizard
. Make selections and enter the data in each dialog
box.
Click on the
Next
command button to move to the next dialog box. When you are finished, the new connection will be added
to the
Connection Name
list in the
Terminal Connection Manager
.
Click on the
Back
command button to go to the previous dialog box.
Click on the “
X
” icon on the top right of this dialog box to quit the setting at any time.
The following four figures show the sequence of the
Terminal Connection Wizard
.
Make selections and enter the
Name
for the new connection and type
IP Address
or
DNS Name
to connect to
the server. If you are connecting across a slower network, you may click on Low Speed Connection.
Terminal Connection Wizard
Click on
Desktop
if you want the Windows NT desktop displayed by default while connecting. Or click on
Application file
name
and type its name when you want to start this application while connecting. You can also specify a working directory
when you specify an application. If
default the connection bar
is enable. The connection bar will be showed on the
Windows desktop. If it is disable. The connection bar will be hided.
BOSSTX2B CE 5.0 User's Manual
