Quick Installation Guide of
BOSSW213
5
of
11
Installation
Step One – Power On
BOSSW213
Connect DC 7.5V Power Adapter to
BOSSW213
and the wall power socket.
Notice:
It will take about 55 seconds to complete the boot up sequence after powered on
the
BOSSW213
; Power LED will be active, and after that the
WLAN Activity LED will be flashing to show the WLAN interface is enabled
and working now.
Step Two – Configure
BOSSW213
1.
Connect your PC to LAN port for configuration setting
BOSSW213
is delivered with the following factory default parameters on the Ethernet
LAN interfaces.
Default IP Address
: 192.168.1.254
Default IP subnet mask
: 255.255.255.0
WEB login User Name
: <empty>
WEB login Password
: <empty>
Configure your PC with IP address between 192.168.1.1 to 192.168.1.253 and subnet mask to be
255.255.255.0, then open an Internet browser (i.e. Microsoft IE6.1 SP1 or above) to connect
BOSSW213
by entering http://192.168.1.254 to URL field.