12
5. Declaration of conformity
Gas Concrete Nailer
1.
Fastener type and size
•
Nail shank
: 2.6~3.0mm(0.102”~0.118”)
•
Nail length
: 15~40 mm(9/16”~1-1/2”)
•
Collation type
: plastic collation
•
Nail strip angle
: 0°
•
Magazine capacity
: 4 nail strips, or 40 nails
2.
Tool spec
•
Model number
: BOSSG40
•
Type of tool
: Concrete Pin Nailer
•
Dimension(LxWxH)
: 460 x 116 x 375mm
•
Weight of tool
: 3..8 Kg(8.4lb)
•
Shot limit
: 1000 shots/hour
•
Drive rate
: 2-3shots/sec
•
Charge time of battery
: 120mins
•
Battery voltage
: 6 Volt
•
Shots per Charge
: 4500shots
•
Shots per fuel
: 1200shots
•
Usable temperature
: -7°C(19°F)~50°C(120°F)
•
Applications & suitability
: Dry wall track, steel to concrete job
•
Actuating system (safety yoke installed)
: full sequential only
•
Trigger device
: Finger activated trigger.
3.
Noise and vibration data
•
Noise characteristic values in accordance with EN 12549+A1
•
A-weighted sound pressure level at workstation
: 97.4 dB
•
A-weighted sound power level
: 100.8 dB
•
Peak C-weighted instantaneous sound pressure level at workstation: < 130dB
•
Vibration value according to ISO 8662-11+A1
: 3.67 m/s2
•
Measurement uncertainty (Standard)
: 1.83 m/s2
Declaration of conformity
We
BOSSONG S.p.A.
Via Enrico Fermi, 51 (Z.I. 2)
24050
GRASSOBBIO
(Bergamo)
Italy
Tel. +39 035 3846 011
declare under our sole
Chiodatrice a gas per calcestruzzo BOSS G40
responsibility that the
2006/42/EC (MSD);2006/95/EC (LVD);2004/108/EC (EMC)
conforms with the directive
2011/65/EU (RoHS)
and the standards
EN ISO 12100;EN 792-13+A1;EN 12549+A1;ISO 8662-11+A1
EN 60745-1;EN 60745-2-16;EN 55014-1;EN 55014-2+ A2
EN 61000-3-2;EN 61000-3-3;EN 50581
EN 60335-1;EN 60335-2-29;EN 62233
EN 61558-1;EN 61558-2-16
Serial number
signed:
Andrea
Taddei
–
Direttore
Generale
