WASP™ NEST3 Smart Receiver and Gateway Operations Manual
- 15 -
3.2.2.11 Reset System Settings
The reset system settings option allows you to restore
the receiver to its default setting.
You can restore the receiver default setting by
choosing
RESET SYS SETTINGS
from the SYSTEM
SETTINGS menu. Once in the RESET SYS
SETTINGS screen tap on
OK
to authorize the system
setting reset.
3.2.3 LOGS
The BossPac NEST System has extensive logging capabilities. The logs are stored on a microSD
card in csv format.
3.2.3.1 Connecting to the USB port
The logs can be retrieved by connecting a computer to the USB micro-B connector on the NEST
main board. As the NEST is itself certified as an stand alone electrical enclosure, the connector
is located behind the back panel for Hazardous Location certification purposes.
**** IT IS NOT RECOMMENDED TO POWER THE DEVICE VIA THE USB PORT, AS THE
SUDDEN REMOVAL OF POWER MAY CORRUPT THE MICROSD CARD. ****
3.2.3.2 Retrieving the Logs
The microSD card will appear on the computer as a removable storage drive. Navigate to the
drive using the File Explorer. Copy the logs of interest from the microSD card to a folder on
your computers hard drive.
3.2.3.3 Formatting the microSD Card
From the Main Menu select LOGS and then FORMAT SD CARD to clear all logs from the
microSD card.
3.2.3.4 microSD Card Specifications
The NEST will work with microSD cards using either a FAT or FAT32 file system. The NEST
ships standard with a 2 GB microSD card rated down to -40C. Larger cards can be used;
however, care should be taken in selecting the SD card for the operating environment. Consumer
grade SD cards are typically only rated for temperatures down to -25C.
RESET
SYSTEM SETTINGS
RESET SYSTEM SETTINGS
21'C CRI=4 WRN=1 13:46 NOV 24/10
CANCEL
OK
