Tool Model
Fastener Type
Fastener SKU
Gauge
Length
FN1520
15
1-1/4” (32mm)
FN1524
15
1-1/2” (38mm)
FN1528
15
1-3/4” (45mm)
FN1532
15
2” (50mm)
FN1536
15
2-1/4” (57mm)
FN1540
15
2-1/2” (63mm)
TOOL SPECIFICATIONS
All demensions in inches unless otherwise specified.
-5-
Operating Pressure:
70 to 120 p.s.i.g. (4.9 to 8.43 kg/cm
2
). Select the operating pressure within in this range for best fastener
performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
Air Consumption:
The N62FNB requires 3.9 cubic feet per minute or C.F.M. (110.4 liters per minute or LT/MIN) of free air at 80PSI
(5.6 kg/cm
2
) to operate at a rate of 100 fasteners per minute. To determine the appropriately sized air
compressor, take the actual rate at which the tool will be run and compare the required C.F.M. (LT/MIN) to the
compressors free air delivery (C.F.M./ LT/MIN) at 80 PSI (5.6 kg/cm
2
).
For example, if your fastener usage averages 30 fasteners per minute, you need 30% of the tools C.F.M.
required to operate the tool at the rate of 100 fasteners per minute. In this case, be sure that your air
compressor can deliver a minimum of 1.17 C.F.M. (33.1 LT/MIN) at 80 PSI (5.6 kg/cm
2
) for optimum
performance.
FASTENER SPECIFICATIONS
* Stainless steel fasteners also available 1-1/4”, 2”, and 2-1/2” . Visit
www.BOSTITCH.com
for further details.
NOTE:
BOSTITCH tools have been engineered to provide superior customer satisfaction and are designed to achieve
maximum perfomance when used with precision BOSTITICH fasteners engineered to the same exacting
standards.
BOSTITCH cannot assume responsibility for product performance if our tools are used with
fasteners or accessories not meeting the specific requirements established for genuine BOSTITCH
fasteners and accessories.
N62FNB
Description
FN15ga Angled Finish Nailer
Engine Type
Oil-Free
Operation Pressure Range
70-120 PSI (4.9 to 8.43kg/cm
2
)
Maximum Operation Pressure
120 PSI (8.43 kg/cm
2
)
Fastener Type
FN15 Series
Fastener Gauge
15 Gauge
Fastener Range
1-1/4” – 2-1/2” (31mm – 63mm)
Magazine Capacity
129
Length
14-3/16” (360.3mm)
Width
3-5/8” (92mm)
Height
11-11/16” (2 96.8mm)
Weight
4.15 lbs. (1.8kg, Including fitting)
N62FNB
Angled Finish Nails
