background image

3

E

N

G

L

I

S

H

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with dry cloth.

7.

Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.

8.

Do not install near any heat sources such as radiators, heat 
registers, stoves, or other apparatus (including amplifiers) that 
produce heat.

9.

Do not defeat the safety purpose of the polarized or grounding-
type plug. A  polarized plug has two blades with one wider than the
other. A grounding-type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your 
safety. If the provided plug does not fit into your outlet, consult an 
electrician for replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit 
from the apparatus.

11.

Only use attachments/accessories specified by the manufacturer.

12.

Unplug this apparatus during lightning storms or when unused for
long periods of time.

13.

Refer all servicing to qualified service personnel. Servicing is 
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled 
or objects have fallen into the apparatus, the apparatus has been 

This class B digital apparatus complies with CAN ICES-3(B). Cet appareil 
numérique de classe B est conforme á la norme NMB-3(B) du Canada. 

exposed to rain or moisture, does not operate normally, or has 
been dropped.

14.

Maintain a minimum distance of 2" (50mm) around the front, rear,
and sides of the apparatus for sufficient ventilation. The ventilation
should not be impeded by covering the ventilation openings or 
placing on or around the apparatus items such as newspapers, 
table-cloths, curtains, etc.

15.

No open flame sources, such as lighted candles, should be 
placed on the apparatus.

16.

The apparatus shall not be exposed to dripping or splashing. 

17.

Either the power inlet connector on the rear of the apparatus or 
the power plug at the wall must remain accessible, to be able to 
disconnect power from the apparatus. 

18.

19.

To completely disconnect this apparatus from the AC Mains, 
disconnect the power supply cord plug from the AC receptacle. 
Use only with the cart, stand, tripod, bracket, 
or table specified by the manufacturer, or sold 
with the apparatus. When a cart or rack 
is used, use caution when moving the 
cart/apparatus combination to avoid injury 
from tip-over. 

20.

CAUTION:  These servicing instructions are for use by qualified 
service personnel only. To reduce the risk of electric shock, do not 
perform any servicing other than that contained in the operating 
instructions unless you are qualified to do so.

21.

WARNING:  Only use attachments/accessories specified or 
provided by the manufacturer 

22.

WARNING

:  

Please refer the information on exterior bottom 

enclosure for electrical and safety information before installing 
or operating the apparatus.  

23.

When not in use and during movement, please take care of the 
power cordset, e.g. tie up the power cordset with cable tie or 
something like that. It shall be free from sharp edges that can 
cause abrasion of the power cordset. When put into 
use again, please make sure the power cordset is not damaged, 
If any damage is found, please contact customer service and 
replace the power cordset.   

24.

Warning: To reduce the risk of electric shock, do not remove cover 
(or back) as there are no user-serviceable parts inside. Refer 
servicing to qualified personnel.  

25.

Observe and follow local regulations regarding battery disposal. 
Do not keep the battery in a place exposed to direct sunlight or
in places with extremely high temperatures, such as near a heater.  

No objects filled with liquids, such as vases, shall be placed on 
the apparatus.

Note:

This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to part 15 of the FCC

American Users:

Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures: 

Reorient or relocate the receiving antenna. 
Increase the separation between the equipment and receiver. 
Connect the equipment into an outlet on a circuit different from 
that to which the receiver is connected. 
Consult the dealer or an experienced radio/TV technician for help.

Caution:

  Unauthorized changes or modifications to the receiver could

void the user s authority to operate the equipment.

This symbol found on the apparatus indicates hazards 
arising from dangerous voltages.

This symbol found on the apparatus indicates the user
should read all safety statements found in the user manual.

This symbol found on the apparatus indicates 
double insulation.

Warning! 

To reduce the risk of fire or electrical shock, do not
expose this apparatus to rain or moisture.

Canadian Users:

FCC Radiation Exposure Statement
1)This equipment complies with FCC RF radiation exposure limits set forth for 
an uncontrolled environment. This transmitter must not be co-located or 
operating in conjunction with any other antenna or transmitter. This equipment 
should be installed and operated with a minimum distance of 20 centimeters 
between the radiator and your body.

Caution! 

Any changes or modifications not expressly approved by the party responsible 
for compliance could void the user's authority to operate the equipment.
2)the IC statement of the user manual is not correct, attached the correct IC 
statement for your reference. please update the user manual.

 

Canada

The device meets the exemption from the routine evaluation limits in section 
2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain 
Canadian information on RF exposure and compliance. 

 

Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la 
section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, 
utilisateurs peut obtenir l'information canadienne sur l'exposition et la 
conformité de rf.

WARNING:

DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD 

‡7KHUHPRWHFRQWUROVXSSOLHGZLWKWKLVSURGXFWFRQWDLQVDFRLQ

  button cell battery. If the coin/button cell battery is swallowed, it 
  can cause internal burns in just 2 hours and can lead to death.

‡.HHSQHZDQGXVHGEDWWHULHVDZD\IURPFKLOGUHQ,IWKHEDWW

ery

  compartment does not close securely, stop using the product
  and keep it away from children. If you think batteries might have
  been swallowed or placed inside any part of the body, seek 
  immediate Medical attention. 

‡2EVHUYHDQGIROORZORFDOUHJXODWLRQVUHJDUGLQJEDWWHU\GLVSR

sal.

‡'RQRWNHHSWKHEDWWHU\LQDSODFHH[SRVHGWRGLUHFWVXQOLJKW

 or 

  in places with extremely high temperatures, such as near a heater.

Summary of Contents for MC100 Blue














Reviews: