Troubleshooting
XRD Remix status light diagnostic codes
The Botlink XRD Remix is identified by a red silicon board with 3 upward facing status lights on
the long edge of the board.
After upgrading to Botlink XRD App Version 3.1.1 or later, the following diagnostic codes are
available.
Status Light
The Status Light is a RGB LED. When the XRD is installed with the supplied case, the Status
Light is denoted by a “Gear” symbol.
The status light is used to indicate 2 things
● Which configured network is being used to connect to the internet
● If the Autopilot is sending or receiving messages
When the XRD is initializing, the Status Light may change color several times. Once the system
is initialized, the following table summarizes the various states of the Status Light, and their
interpretations.
Status Light
Color
Network State
Blinking
Autopilot State
Red
No network connected to
internet
Yes
Sending/receiving messages
No
Not sending/receiving messages
Green
Ethernet or WiFi connected
to internet
Yes
Sending/receiving messages
No
Not sending/receiving messages
Blue
Cellular connected to
internet
Yes
Sending/receiving messages
No
Not sending/receiving messages
20
