Bottarini GDP21 Maintenance And Operating Manual Download

Page: 9 / 62

2. Foreword

2.4 Maintenance and care

Care and maintenance are all-important

if the screw compressor is to meet the
demands placed upon it. Compliance with
the prescribed maintenance intervals and
careful execution of care and maintenance
work are therefore essential, especially
under difficult working conditions.

Service

In case of faults, or should you require

spare parts for the screw compressor,
please contact your local GARDNER
DENVER agent.

In case of damage, the trained technical

staff will guarantee a fast, expert repair
using GARDNER DENVER spare parts.
Original GARDNER DENVER spare parts
are manufactured according to the state of
the art and guarantee continued reliable
operation.

If you have important questions,

Fig. 6

Please enter the data from the identifi-

cation plate for your compressor, in the
spaces above. In case of questions or
orders for spare parts, please give us the
compressor type, compressor number and
the year of construction as given on the
identification plate.

If you give us this data you can be sure

that you will be given the correct
information or sent the spare parts you
require.

2.5 General information

This operating manual is to help you to

get to know the compressor and to use it
for its intended applications. It contains
important information about how to
operate the compressor safely, cost-
effectively and with due care. Compliance
with the instructions in this manual will
help to avoid danger, reduce repair costs
and downtime, and increase the reliability
and service life of the compressor.

This operating manual is to be

supplemented by instructions concerning
current national regulations for accident
prevention and environmental protection.
It must always be available at the site of
the compressor. The operating manual is
to be read and used by all persons in
charge of work with the compressor, for
example operation, including setting up,
correcting faults during operation, disposal
of waste products from production, care,
disposal of process materials, upkeep
(maintenance, inspection, repair) and
transport.

Besides the operating instructions and

the current regulations applicable in the
user's country and at the sites of operation
concerning accident prevention, the
recognized technical rules for safe and
proper working are also to be complied
with.

Warranty

Only use this compressor with accurate

knowledge of and in compliance with this
manual.

GARDNER DENVER S.r.l. do not accept

responsibility for safe functioning of the
compressor for actions that do not
correspond to normal use or for purposes
not mentioned in the manual.

Warranty claims cannot be entertained for:

* Operating errors

Inadequate maintenance

* Incorrect fuels

Damage caused by non-use of original
GARDNER DENVER parts

* Modification of the system.

The Guarantee and Liability terms of

GARDNER DENVER's General Terms
and Conditions are not extended through
the above instructions.

Any unauthorized modification of the

compressor system/station or the
installation of components (e.g. fine
separators) not released by the
manufacturer result in the loss of the
CE symbol.

This fact results in the termination/

expiration of the guarantee and warranty
claims against the manufacturer.

Safety regulations

Danger

It is important that you follow the
safety regulations in Chapter 3 of the
operating manual.

Technical modifications

We reserve the right to undertake

modifications without notice in the
interests of technical progress.