Safety
Precautions
• Do not stand on, drop, scratch, or allow objects to fall on the solar
panels as doing so may damage them and void the warranty.
• Do not place anything on the solar panel, even for a moment
because the resulting residue may damage or stain the glass surface.
• If the front glass is broken, or the back sheet is torn, contact with any
panel surface or panel frame can cause electric shock.
• Broken J-boxes or connectors are electrical hazards as well as
laceration hazards. Installers should remove any such solar panel
from the array and contact BougeRV for disposal instructions.
• Do not install or handle the solar panel when they are wet or during
periods of high wind.
• Do not block drain holes or allow water to pool in or near module
frames.
• Unconnected connectors must always be protected from pollution
(e.g dust, humidity, foreign particles, etc), prior to installation. Do not
leave unconnected (unprotected) connectors exposed to the
environment. A clean assembly environment is therefore essential to
avoid performance degradation.
• Save these instructions!
3
