▲Temperature Adjustment Settings
Touch the LCD smart screen to adjust and cool the internal temperature of the car refrigerator.
Operation Method
①
Press and hold the {On/Off} key for 3 seconds to turn on/standby the refrigerator.
②
Touch the {+ or -} key to adjust the temperature.
③
Press the {+ or -} key for a long time. The preset temperature is linearly adjusted with a speed
of 4°C. During the adjustment, the number does not flicker.
④
Within 3 seconds after the operation panel has not detected any key operation, the tempera-
ture display will stop flashing, exit the temperature setting, and save the currently set tempera-
ture.
⑤
The temperature display shows the actual temperature inside the box.
⑥
In the standby mode, only the temperature display is off, the other buttons are on.
⑦
In working status, press {SET} key to perform MAX/ECO switching.
⑧
Temperature adjustment function can be adjusted between -7.6
℉
~50
℉（
-22 °C ~ +10 °C
)
.
⑨
Temperature conversion: Press [SET] and [+] 3 seconds at the same time Celsius (°C) \ Fahren-
heit (°F) temperature switch.
⑩
Power protection mode: In the power-on state,press “SET”button for 3 seconds to enter the
battery protection setting. Click “SET”button to switch H>L>M in turns, then corresponding gear
flashes for 5 seconds, exits and saves. We recommend High level for car battery. To set Medium
and Low level when with other battery.
⑪
Note: please adjust the refrigerator parameters while unlocking. If the refrigerator is locked,
press “set” up for 3 seconds to unlock it.
The car refrigerator has a power-off memory function. The working state (power on/off state and working mode) before the
power off is automatically restored after the next power on, and there is no need to set it again.
ECO : Energy Saving and Cooling Mode
MAX: Strong Cooling Mode
05
