Choose a site for mounting the solar panels that is free from shade
and located in an area that receives maximum sunlight daily.For
maximum solar power absorption throughout the day, a
tilt-mounting kit is recommended. (The tilt mount kit can be searched
at www.amazon.com/dp/B08DNQGLZR or "bougerv tilt brackets" in
Amazon)
6
5
-INSTALLATION
5.1 Installation Overview
5.2 Module Handling
•Open the packaging and check to make sure that all parts have
been received.
•Arrange to have on hand the proper tools (NOT INCLUDED) to
carry out the mounting installation.
•Determine the mounting location of the solar panels .
•Mount the charge controller
（
NOT INCLUDED
）
within 5 feet of
battery or loss of current may occur.
•Wire the battery
（
NOT INCLUDED
）
to the charge controller and
then the solar panel to the charge controller to ensure thatthe
correct polarity is observed.
•Use gloves when handling panels.
•The panel glass is sensitive to oils and abrasive surfaces, which may
lead to scratches and irregular soiling.
•Do not place panels such that the glass comes in contact with
abrasive surfaces, and minimize any contact with the glass in
general.
•Do not place anything on the panels, even for a moment.
•Never lift or move the panel using the cables or the junction box
under any circumstances.
5.3 Mounting
Recommendations
The solar panels can be permanently installed level using the
hardware included.If you choose not to use the included Z brackets
ensure that you create a ½ inch space between the mounting
surface and the solar panel to allow for proper airflow under the solar
panel.
When making connections ensure polarity is maintained,reverse polarity
may cause damage and will void the warranty.
