Page 15
9e1048
4. Service and Maintenance
To properly maintain this product, the following checkups or operations must be performed:
Monthly:
•
Inspection of welds, in particular the welds on the lifting device.
•
Check if pipe brackets are attached properly or show any fractures.
•
Also look for any wear of the pipes near brackets and ensure that the location of the pipes
is such that they are not obstructed.
•
Check the tubes thoroughly for deformation, damage and corrosion.
•
Check the hydraulic system for leaks
•
Check the oil level of the worm gear unit. This should be maintained at this level at all
times. When necessary, fill it up with BouMatic hydraulic oil. Before filling the oil tank for
contamination and remove them.
•
Grease the chains (track and drive) with multipurpose grease.
•
Grease the pivot point of the hydraulic cylinders and grease the cylinder rods.
Cylinders must be inspected for leakage along the gasket(s) near the shaft. If necessary, gaskets should be re-
placed preventively. Also look for damage to the shaft (scratches and wear).
Also inspect the attachment of the cylinder, in particular check for damaged hinge loops and ball heads.
Check the connection between the tubes and the cylinder, paying particular attention to wear and to whether the
connections are without tension.
Yearly:
•
Change the oil of the worm gear unit. Refill with BouMatic hydraulic oil.
After six years:
•
Rubber and plastic tubes should be replaced by similar tubes (recommendation no. 1/74 of
the Association of Industrial Accident Insurers; in accordance with DIN-20066).
Unassembled tubes in stock may be used for four years after the date of manufacture, assembled tubes for only
two years. Use of the wrong tubes or tubes that are too old may result in life-threatening situations and substantial
environmental and mechanical damage.
Ordering information
Item #
Product description
605202146
BouMatic Hydraulic oil, barrel 20 liter
Attention!
Summary of Contents for Xcalibur
Page 31: ...Page 31 9e1048 8 24 CONTROL BOX Relay Power Supply c...
Page 32: ...Page 32 9e1048...
Page 33: ......