Page 16
9e1048
Symptom
Possible Cause
Action
The crowd gate is
not working at all
No operating voltage
Check the network voltage
Emergency stop pushed
Check the control both boxes
The
crowd
gate
moves slow upwards
or not at all.
No hydraulic pressure
Check the Hydraulic Power Pack
No response control boxes
Control the main switch to
reset the system. Wait 10 sec.
and try again. If there is no
response contact your dealer.
Check if the crowd gate is
down completely
The crowd gate is
not moving
forwards.
Move the crowd gate
downwards and try again. If
there is no response
contact your dealer.
Check if there is no cow
blocking the crowd
gate.
The drive unit is not working
Move the crowd gate a bit
backwards and try again
forwards.
Control the main switch to
reset the system. Wait 10 sec.
and try again. If there is no
response contact your dealer.
Control the main switch to
reset the system. Wait 10 sec.
and try again. If there is no
response contact your dealer.
The crowd gate is out
of alignment
One of the two chains has
no tension.
Check the mounting points
of the chains.
The drive axles are loose
or broken
Check the drive axles
and contact your dealer
5. TROUBLESHOOTING
Summary of Contents for Xcalibur
Page 31: ...Page 31 9e1048 8 24 CONTROL BOX Relay Power Supply c...
Page 32: ...Page 32 9e1048...
Page 33: ......
