Boumatic Xcalibur, Operator'S Manual

Page 7

9e1048

 2. SAFETY

 2.1 OWNER’S DUTY OF CARE

Design and construction of this product were preceded by risk assessment and careful identification of applicable 

harmonized standards and other technical specifications. This product therefore represents the state-of-the-art 

of technology and ensures a maximum level of safety. To achieve safety on farms, all necessary measures must be 

taken. The owner is responsible for planning such measures and for verifying their implementation.

In particular, the owner has to ensure the following:

•  Legal requirements must be met.

•  Instructions on basic safety precautions must be followed. 

•  Safety signs, stickers and labels on the product must be replaced immediately if they are illegible or lost!

•  All applied safety signs or warning instructions must stay in place and remain legible.

•  Escape routes must be indicated by signs in accordance with national regulations!

•  The required personal protection equipment must be available and used by operators, maintenance and 

service personnel. 

•  A full set of legible instructions must always be kept near the product. Anyone having to work on the 

product must have the possibility to look into the instructions at any time.

•  The owner has to ensure that his staff receive adequate training adapted to suit the specific conditions of 

his facility; emphasis should be placed on safety aspects.

•  Unauthorized persons (e.g. children) are not permitted into hazardous areas and must not have access to 

cleaning agents or disinfectants.

•  Anyone involved in the operation, maintenance, inspection or handling of this product in any other way 

must know and understand this manual (especially the safety information and warnings).

•  This product

-

should only be used for its intended purpose.

-

should only be used if in perfect operating condition. The safety equipment, in particular, should be 

regularly checked to make sure it is in perfect operating condition.

•  Operating personnel who require training may only work on the product under the supervision of an 

experienced person. The successful completion of training is to be confirmed in writing.

•  Persons carrying out work on this product must be sufficiently qualified!