background image

13

AUDIO TARGET IDENTIFICATION

While  the  LCD  (Liquid  Crystal  Display)  is  very  accurate  in  identifying
buried objects, the user in the field does not always maintain the display
screen in his field of vision.  Therefore, we have incorporated an audio
feedback  mechanism  to  alert  the  user  to  the  nature  of  buried  objects.
This  audio  feedback  system  first  alerts  the  user  to  the  presence  and
classification  of  objects,  whose  nature  and  location  can  be  confirmed
using the LCD display.

The  detector  will  sound  one  of  three  different  tones,  depending  on  the
type of metal detected.

BASS TONE

Ferrous objects, such as iron and steel, will induce a bass tone.
The smallest gold objects can also induce a bass tone.

MEDIUM TONE

Pull-tabs,  newer  pennies  (post-1982),  larger  gold  objects,  zinc,
small  brass  objects,  and  most  bottle  screw  caps  will  induce
medium  tones.  Many  recent  vintage  foreign  currencies  will
induce  medium  tones.  Medium  tone  objects  will  illuminate  the
two center target indicators.

HIGH TONE

Silver and copper coins, larger brass objects, older pennies (pre-
1982),  and  highly  oxidized  metals  will  induce  high  tones.
Quarters, dimes and other precious coins fall into this category.

Audio Target Identification (ATI) classifies metals into four categories.

LOW TONE

Nails, Bottle Caps,

& Smaller Gold

MEDIUM TONE

Old & New Pull Tabs, Zinc

Pennies (Post 1982), Nickel,

Larger Gold Objects

HIGH TONE

Copper, Silver & Brass

Copper Pennies (Pre 1982)

Summary of Contents for Legacy 1000





















Reviews: