www.boutiquecamping.com
|
+44 (0) 203 394 2986
|
info@boutiquecamping.com
Then pop each pole into the black housing on each side
of the door.
Then work you way down using the velco to secure each
pole into place.
Please make sure all poles are butted up tight to the
seam and sound sheet at the bottom.
7.
Zip the door shut, Then using the thicker ribbed peg, peg
out the guy ropes around the whole tent without putting
any of them under too much tension.
Once all the pegs are in, adjust the guy ropes whilst
following the seams to create tension. This way will
create a perfectly shaped Luna Tent without creases.
8.
Using the small gold pole. thread through the sleeve on
the door canopy
9.
10.
12.
11.
N.B.
All guy ropes need to follow the lines of the seams in the roof. Adjust the guy rope slider so you have
approx. 50cm of loop to the peg. This allows adjustment in both directions. It is important to make sure the
tent stays symmetrical and that the tension is evenly spread. The pegs should be at least 1m from the tent.
