1.1 DISCLAIMER OF LIABILITY
The installation, handling and use of modules are beyond Boviet’s control, and Boviet Solar does
not assume responsibility for loss, damage, injury, or expense resulting from the improper installation,
handling, use, or maintenance of the module.
Boviet Solar assumes no responsibility for any infringement of patents or other rights of the third parties that may
result from use of the module. No license is granted by implication or under any patents or patent rights.
Boviet Solar reserves the right to update this manual, module specifications and/or relevant information
without prior notice.
1.2 DECLARATION
The fire rating of the module is valid only when mounted in the manner specified in the mechanical
mounting instructions.
The module is considered in compliance with UL 1703/61730 or IEC 61215/61730 only when mounted in the manner
specified in the mechanical mounting instructions below.
A module with exposed conductive parts is considered to be in compliance with UL 1703/61730 or IEC 61215/61730
only when it is electrically in accordance with the instructions presented below and the National Electrical Code.
Any module without a frame (laminator) should not be considered to comply with the requirements of UL 1703
or IEC 61215/61730 unless the module is mounted with hardware that has been tested and evaluated with the
module under this standard or by a field engineer certifying that the installed module complies with the requirements
of UL 1703/61730 or IEC 61215/61730.
2
|
UNPACKING AND STORAGE INFORMATION
At the time of receipt, verify that the product delivered is the same product ordered. The product name, sub name,
and serial number of each module are clearly marked on the outside of each packing box.
Store packing boxes in a dry and ventilated room.
1
|
MANUAL OVERVIEW
This manual offers general information regarding installation and maintenance of photovoltaic
modules manufactured by Boviet Solar, which thereafter will be referred to as “modules.”
These manual instructions should be read and understood before installation, handling, or
maintenance. To ensure the correct and safe use of the photovoltaic modules, the installer
should be familiar with the mechanical and electrical requirements for photovoltaic systems.
1.
2.
02
Summary of Contents for Vega BVM6610M S-H-HC-BFDG Series
Page 1: ......
