www.etractorimplements.com
25
OPERATION
2. Deflector Position:
Each discharge hood is equipped with a
deflector on the end to place the chips exactly
where desired. There are 2 types available:
a.
Manual Clamp (BX52):
The deflector is held in place by clamping
bolts on each side. Loosen the clamps,
move the deflector and tighten the clamps.
Position as desired.
b.
Spring-Loaded (BX62):
The deflector is spring-loaded up and held
in place by a chain. Release the chain
from its anchor bracket and move the
deflector to its desired position. Secure
Manual Clamp
chain in its anchor bracket.
3. PTO Control:
If you are not familiar with the location of the
PTO control on your tractor, review your
tractor's Operator's Manual. Always engage
the PTO control slowly when the engine is
running at low idle RPM. Disengage the PTO
control slowly at low RPM to allow the
machine to slow and stop before engaging the
PTO brake. Remember the PTO drives the
rotor. When the PTO is engaged the rotor will
also start to turn.
4. Flow Control Valve:
This manually-set flow divider allows the
operator to set the flow through the circuit from
Spring-Loaded
0% to 100% by dumping the excess flow back
to the tractor. A scale on the face of the valve
is numbered from 0 to 10 to define the percent
of flow from 0 to 100% flowing into the circuit.
The hydraulic feed circuit is equipped with a
flow divider so the operator can adjust the
feeding speed appropriate for the operating
conditions. Loosen the lock and move the
pointer arm to the desired position. Tighten
the lock bolt. Adjust in small increments as a
small change can result in a large change to
feeding speed.
FLOW CONTROL VALVE
Summary of Contents for BX52
